//some info : Samsung Galaxy Note 4 Beanstalk 6.12 (based on CM, android 6.0.1) Xposed enabled, rooted etc.
Coverage in my school is pretty bad - low to no signal. Too much concrete I guess. Because of it my battery drops pretty fast even when I'm not using my phone.
I made a tasker profile to enable the airplane mode when there's no signal. Task detect if BT/WiFi was enabled before and turns it on again. Task disables Airplane mode after 20 mins to check for signal, and whole task restart.
However the problem is that BT is disconnected for a while, which is anoying and disables smart lock (up to first unlock), disconnect BT headphones and watch. Tweak is worth it ; now battery drops much slower. I want it to keep checking every 20 mins because there are some places where signal is pretty good.
//the question I'm looking for a way to tweak airplane mode (or just disable signal with other method), and leave BT/WiFi untouched.
I guess it's for older android versions, but tried anyway. In this folder I have almost right file. It's called "settings.db-journal". SQLite editor can't open it and build in editor shows Chinese? letters?.
If you could help me that would be awesome.
Thanks, Peter.
from xda-developers http://ift.tt/1VWaUnY via IFTTT
Welcome to a central place where you can download all kinds of firmware versions for the Mate S I will try to add more versions once they become available. Enjoy fast and uncapped download speeds here since some of them are terribly slow on the Huawei website.
Disclaimer: I am not responsible for anything that may happen to your device!
Official Firmware CRR-L09
CRR-L09C432B114 [5.1.1][Lollipop][EMUI3.1][FULL_Version] Download:Huawei server || Google Drive || Mega.nz
So made a pretty bonehead move. Long story short used the imei number off my box forgetting i received another phone. So after using cellunlock for a code(which was obviously wrong) i couldnt get the phone unlocked. I got a free code from at&t after using the right imei number off cell phone but it will not work. Im still getting Network Unlock Request Unsuccessful. From what I read on previous posts im pretty much screwed. however those posts were from years back. Is there anything I can possibly do to unlock this cell phone?
Any help is appreciated. Thanks
from xda-developers http://ift.tt/1M40lx9 via IFTTT
Hi there, I have build a group at Telegram for people with certain knowledge of android and technology , S4 developers, testers & same kind , to share our ideas and talk freely about tech related stuffs and android development.
Note: (This group doesn't require you to publish your phone number.)
Download Telegram App:
In case you don't have the Telegram Messenger yet you can get one by the following links:
Is there anyway someone can instruct me or guide me to getting the TouchWiz 6.0 Dark Theme to work with the s7 edge. It was available in the Samsung theme store for the Note 5 and Samsung S6 Edge + when it was running lollipop but now when you search for it in marshmallow it isn't there. Any help would be appreciated
I'm receiving a 5x this weekend, its the international version. Does anyone have experience with this version in the US on T-mobile? I know it doesnt have band 12, so thats my only concern.
Please share your experience, so I know if I should buy the US model instead (got the 32gb for $250 during an ebay sale).
from xda-developers http://ift.tt/1TlKAmI via IFTTT
This game allows multiplayer play and is not subject to Xbox Live Family Settings. Microsoft shares User IDs and gamertags. LEAVE GRAVITY IN THE DUST The best arcade racing game series reaches a new turning point! Perform dynamic, high-speed aerial stunts in an intense driving experience powered by a brand-new physics engine! LUXURY DREAM CARS • More than 95 high-performance cars (80% NEW!) • Top licensed manufacturers and models like the Lamborghini Veneno, Bugatti Veyron, Ferrari FXX, Lamborghini Aventador and Pagani Zonda R • Newly recorded high-fidelity car motor sounds for realistic audio immersion GET AIRBORNE • Hit the ramps and take the race above • Perform barrel rolls and wild 360ΒΊ jumps • Maneuver through the air, pulling stunts while racing NEW EXOTIC LOCATIONS • Race in 13 different settings like Venice, French Guiana, Iceland, the Nevada Desert, Dubai and other exciting locations! • All tracks available in original and mirror variations in Career mode • Discover plenty of hidden shortcuts NEW FEATURES FOR SPEED FREAKS • 9 seasons & more than 300 events in Career mode • Stunning visuals thanks to next-gen shaders, real-time geometry reflection & other amazing effects for a new simulation of speed! • A detailed damage system like nothing you've seen before • Check out the new Infected and Drift Gate game modes SIMULTANEOUS MULTIPLAYER & GHOST CHALLENGES • Simultaneous multiplayer action for up to 12 real opponents! • Dare friends to asynchronous races in your favorite cars • Compare scores on the new leaderboards with friends and drivers around the world • Share your racing achievements and prove that you're the ultimate speed machine MUSIC TO REV YOUR SOUL • A heart-thumping mix of amazing licensed music for your game • Featuring real tracks from Bloc Party, Mutemath & The Crystal Method! A game for fans of watch on youtube :http://youtube.com/watch?v=7sUWldnOoqM Download : http://ift.tt/1TlKAmF
from xda-developers http://ift.tt/1X0zzpT via IFTTT
I'm hoping that this isn't a unique problem just for me but this is literally the first time I've had this problem. Depending on the use of my Note 5 will determine if I can even unlock my phone the next time I turn it on. I'll go about my usual use of any phone should be able to accomplish (browsing Instagram/Facebook/Chrome/Email/Pinterest/etc.). After a little while it become noticeable that the phone is starting to slow down considerably if I continue to use it. However, the one that really grinds my gears is I'll do my typical browsing and then lock my phone, put it back in my pocket. Something we all do, however, the next time I go to pull out my phone I can't even get the screen to come on for sometimes five minutes. I can hear it thinking with random sounds of the lock screen either responding to my fingers touching the screen or the un/lock sound but nothing happens. Sometimes, I can see the screen and all the notifications that I want to check on but nothing is happening. Sometimes, I'll double tap the home button to get to the camera shortcut programmed to it and sometimes the camera app comes up like it should but it is completely unresponsive.
So the steps I've tried to resolve the issue:
Restore to Stock ROM
Different ROMs
Even leaving the Stock ROM alone and just seeing if it still occurs
I'm just not sure what to try next. There's a chance the problem could be a memory error that's occurring physically but I'm not 100% sure.
Attached is my Note 5's current state of customization. Any help with this would be very very much appreciated.
Thank you
from xda-developers http://ift.tt/1X0zzpR via IFTTT
Hi guys, I'm sorry if this has been discussed in another thread, but I've been digging into this for about 2 hours now, and found nothing. I have a backup galaxy s advance, that I recently flashed with a cm 11 rom, and I'm not sure, but I'm under the impression that before with 4.1.2 stock, I could watch 480p videos on youtube, now the maximum resolution is 360p, and it's kinda pixelated. My question is....stock, is 360p the maximum resolution supported ? Also, is there any mod/fix whatever that can force youtube to go to 480p ? From my limited knowledge a 800x480 display should be 480p compatible, but please correct me if I'm wrong :) I've tried to modify the pixel density from build prop, but with no effect. Any help would be much appreciated :)
from xda-developers http://ift.tt/235KVfO via IFTTT
I have huge issues with my SDCard. Since I'm on CM13 and formated the SD as internal memory, the card becomes corrupted after a few weeks. My first card which was replaced suddenly caused the system to freeze and then it would not Boot while the card was inserted. Every attempt to reformatreformat in TWRP (which initially did not boot with inserted card too) or in Windows were unsuccessful so I assume the card was broken on a low level.
The new card shows similar signs after only a week (read only fs errors) but I was able to reformat in Android to the "normal" external Mode. I should mention that it is a 64GB Sdxc card. It the only difference between sdxc and sdhc is filesystem support right?
Does anyone have issues with internal memory mode?
from xda-developers http://ift.tt/1TlKzyY via IFTTT
My device started last week with a stain in the screen that I can´t fix, has anybody have this happened?
It´s a yellowish mark on the top left side of the phone, haven't droped it or smashed it, or anything other than regular use, does anybody know? Attached is an image of the mark.
from xda-developers http://ift.tt/1TlKyev via IFTTT
I live in a big city in Italy (Torino), my Mi 5 has just been shipped and I'm going to receive it soon enough.
I've read many mixed reviews on the LTE reception recently, so I'm wondering if there's any italian owner of a Mi 5 here that can shed light on that topic based on his/her experience.
In a big city do you really miss the fact it lacks support for the frequency FDD-LTE 800 MHz? How does it work for you and which carrier do you have?
I've read there's an attempt in progress to unlock the B20 band (http://ift.tt/235KKBi) and I think I'll join the discussion to check if I can provide any help... however this is my first B20-lacking device and I've no idea what I'm going into, so any real life experience would be of help atm! :cool:
from xda-developers http://ift.tt/1TlKwDl via IFTTT
I'll update later with my initial thoughts, but I am pretty excited to finally be getting a new phone, and am excited for how different the g5 is. I was told it would be in store one the 29th, but at least I still got it before official store launch. Also, I went with Titan, anyone else go with that color?
from xda-developers http://ift.tt/235KJ08 via IFTTT
When hovering over the region acronym, the full country name become listed as a pop-up. But when hovering over some regions, like the TLE one near the top there, it instead lists "n/a". I know n/a stands for Not Applicable, but what is meant by certain acronyms having that designation?
Also, does anyone know what acronym stands for the USA and Canada?
from xda-developers http://ift.tt/235KFxm via IFTTT
I've been searching for an AOSP ROM to make my G2 almost like a Nexus, and I would attempt to build it if I had enough space. I'd like to be able to run Android Pay and Miitomo on it, while having Android M.
from xda-developers http://ift.tt/235KEtq via IFTTT
1) I have phone that was water damaged on couple parts (The water detection stickers are intact on cell phone and inside under main board, except on battery have half red) I was cleaning board and one tiny resistor was burned/unsoldered well it come off and I was not able to measure it. It is R710 (look for SIM600 top) you can see on schematic. SM-N900A-TSHOO-7 (you can fine in google or other search engine) My Phone is SM-N900T and it look exactly as SM-N900A (I guess the hardware is same but software might be different)
2) Also the screen does not come on. Any body know is voltage across C622 should be exactly 3.0 volts? I have there same voltage as battery if Battery 4V I get there 4V and if I ohm-out it look like connected directly to the battery terminals??? or chip shorted (U606 "MAX77804")
from xda-developers http://ift.tt/1UvCvgd via IFTTT
I recently received a new unlocked verizon samsung note 4. Since I live in Israel, I inserted a local SIM card but for some reason I get the above message. No network, no calls.... Just a very expensive brick.... I tried hard reset, switching SIM cards from different networks, and nothing. Please advise....:confused:
from xda-developers http://ift.tt/1MWPmjG via IFTTT
So basically I have a set of 5 different battery progress bars. The ranges for the battery percentage of each from max to min are 100 -80, 79-60, 59-40, 39-20, 19-0. Whenever the battery amount is out of one of the ranges it fills the entire widget, not just within the bar, with the foreground color. Is there any way to fix this?
from xda-developers http://ift.tt/1UFKEPI via IFTTT
I don't know if I'm posting this in the correct forum or even if it's allowed(didn't read thoroughly through the rules for this) but considering what it's about... As you all know by now or will soon find out, GeTex has brought to us a way to unlock our VZW S5 locked bootloader with the help of other highly recognized Dev's. The device's able to use at this time are the ones with the Samsung eMMC 15 chip. The Toshiba eMMC 11 chip has yet to be unlocked. As and if you may have read that to Getex's unfortunate findings that he/she has 2 of the 11 chips and then purchased another one to find out that it's also an 11 chip. What I'd like to get going and maybe someone help arrange/coordinate is purchasing GeTex a S5 with the eMMC 15 chip. Since GeTex found this out he/she never gave up on finishing what was started. So with all of this said and for all of you enjoying what was brought onto this VZW S5 community, how about giving GeTex a nice and deserved THANKS by helping getting a S5 with an eMMC 15 chip. The question is, how do we go about it? Do we setup a fund/donation "pot" to get the S5 needed? Please chime in as to making this work as to i believe it's something we can do TOGETHER as a Community. THANK YOU GeTex and to Beaups for the code, JrKruse and others that I cannot think of off hand for making this happen as well. A :):good:
from xda-developers http://ift.tt/1MWPkZh via IFTTT
No chinese in : Browser , Yellow page ( contacts ) , live button remove , etc v..v.. translation multi langugage : 90% Battery Friendly/System Optimizer WiFi Enhanced boot RemoveBloatware Preerooted SuperSu pro 2.67 ( thanks nikolas777 4pda.ru ) Music Walkman Sony Z5 new latest port
Add Dolby Atmos Emoji icon ios9.2 + GG Keybroad modded Add Meizu Camera .... and more
Dowload Rom Reboot into TWRP recovery Wipe data/cache and dalvik, system ( Backup if you need to come back before wiping ) Flash VNMod Rom Then reboot your phone ... The first boot may take to up ~10 minutes or more
Yes people! It is finally here! ColorOS blobs for ONEPLUS ONE, fixing RAW, 64sec shutter time and manual focus. Have been working on this silently for above 3 months, it has full support for BOOTMGR's ColorOS camera. Works on 5.1 and 6.0 based ROMs ONLY! DO NOT FLASH ON 5.0 or 4.4
I am here from INdia, i got this phone as a gift. When i used sua (software update assistant ) for the first time it gave me an update of 1.92 gb and i did it. My software build version changed from 11a to 13b and while 13b was installing it still showed that after this upgrade is completed do download a few more upgrades of the phone...... Now what is happening whenever i open sua it says upgrade available but when it finishes connecting and observing my phone then its status changes to " up to date". How should i upgrade to marshmallow. PLease Help !!!!!!!!.... Now i am on 13 b and i have already reset my device after upgrade...... so help me if there is other way except KDZ flashing.... and if not then also do tell me that. and other question, will flashing the kdz will give me offical upgrade only..
Thanks a lot ..
from xda-developers http://ift.tt/1RNG2D2 via IFTTT
I just tried to roll back to 5.0 rom and now I'm stuck on b300. I installed it but when I try to install official rom via dload it will just say it has failed. The problem is that I have locked bootloader. Yes now I know how bad idea this was... Is there any hope for me?
Edit okay now it seems to work. For anyone else having this same problem. That you can't restore your software. The key is that the update.app needs to be update.app and not UPDATE.APP or update.APP (I thought it wouldn't be that stupid that it would be case sensitive but oh well!)
Sorry for everyone if I cause trouble.
from xda-developers http://ift.tt/1VbKVIB via IFTTT
so this happens only on the first reboot after doing the adoptable storage mod. i kept hard resetting over and over so i could take this pic. once the reboot completes this icon disappears. can this help out any dev? im still on pb5.
from xda-developers http://ift.tt/1RNG0vc via IFTTT
Normally when I post reviews on XDA Developers, I rewrite them to be more for this audience. However, when I'm reviewing SD Cards, pretty much only the facts are interesting, so I've just gone verbatim here since I think it's to the point.
I picked up this MicroSD card (more specifically, MicroSDXC) and promptly ran some tests with it, you can see them in the video, but here are some key facts: * On a USB3.0 reader I was getting 78.64 MB/S read and 18.45 MB/S write for Sequential writes using a 100MiB test file. The card is actually exceeding its own claims here * The same test on the USB3.0 reader with a 1GiB test file gave 77.81 MB/S read and 19.92 MB/S write for Sequential writes. * On a USB2.0 reader I was getting 22.02 MB/S read and 10.70 MB/S write for Sequential writes using a 100MiB test file. The lower speed is to be expected due to a USB2.0 reader. * It arrived formatted as exFAT * It worked just fine in the LG G4. 117gb formatted capacity shown.
Included was a microSD to full size SD adapter which worked just fine in my laptop for the USB2.0 test.
Conclusion So there you go, I like the Silicon Power 128gb microSD card and it's working just fine in my LG G4. Simple conclusion I know, but I think the best I can do here is not beat around the bush.
Notes The tested model number was SP128GBSTXBU1V20SP
Photos Album (has a few more images and a USB2 test)
For example: I would like the phone to go into standby and be able to reactivate it WITHOUT REQUIRING A PASSWORD, for at least 30 minutes. Then if it stays in standby for like over 30 minutes, THEN wants it to require a password.
Is anyone able to share some advice or ideas?
On my LG, there is an option for "Lock Timer", where you can set a lock time after screen timeout. On this Huawei, i can only see a screen timeout option and not lock timeout.
from xda-developers http://ift.tt/1RNFTjf via IFTTT
There seems to be a black bar that i'd imagine to be annoying when you have a transparent navbar. Is it such an eyesore that it seems like in the videos?
from xda-developers http://ift.tt/1VbKKNk via IFTTT
With dc-unlock there is no need to wait two weeks (or more?!)
Just download dc-unlock software and purchase 4 points for unlocking bootloader instantly on the website. ( There are a lot ways to purchase - don't worry)
Install HiSuite on PC and connect phone with pc.
In phone software you need to enable debugging and then in dialer - dial *#*#2846579#*#* - background settings - usb port settings - choose manufacture mode
Then in dc-unlock software choose huawei phones and auto detect.
Now search device, if found enter on right side under server settings the username and password you get per email when purchasing 4 points from dc-unlock website.
Then in unlocking on right side DON'T choose unlock phone! Choose "read bootloader"!
That's the code you need for Multi-Tool to unlock successful.
Good luck!
from xda-developers http://ift.tt/1RNFOMe via IFTTT
I am new into creating and editing custom roms. But now after creating one i have zip file as my output and i need to test this on my android emulator. I have read that you need a system.img file to work in an emulator. If then how do i obtain my .img file from a zip file? I have have an idea about yaffs2 but does not have any idea on how to set it or use it for my purpose. :rolleyes:
from xda-developers http://ift.tt/1VbKFta via IFTTT
Hello, I'm a new guy to the forums here, at least posting... My Samsung Galaxy S3 Neo is having huge problems with battery, for example, today I used the phone just in the morning for about 15-20mins and 1h ago, with the phone sitting unused here, it was giving me a 7% battery warning, I went to see it and it looked like this:
NOTE: The wifi was off all along, you can see the phone is on mobile data (really turned off, not just disconnected). This has been happening for about a month now, the phone is just 1 year old, the battery has no bulge at all, I have uninstalled alot of apps that I don't use in hopes of fixing this and nothing... Even using the Eco mode of the phone that downclocks the processor, its not enough.
Does anyone have any idea of what may be happening?
from xda-developers http://ift.tt/1q6qMsd via IFTTT
Install Normal APK For Andorid 5.0 , Stock and CM ROMs • Expand your network with the intuitive LinkedIn integration in the calendar. • Find your way to meetings easily, using the simple-to-use map integration. • Enjoy the overview and switch quickly from the detailed day view to the monthly view, while never losing sight of your daily planning.
This application uses analytics software to collect and aggregate statistics to help us improve this app and our services. None of this data can be used to identify you.
Hi all. I've noticed that ever since the marshmallow update, default numbers for contacts are not showing first in the G4's default dialer. It's causing me to ring the wrong number too many times. Has anyone else noticed this? Is there a way to reset to the dialer's previous behaviour or can anyone recommend a good alternative? Thanks.
from xda-developers http://ift.tt/1pOg1Kr via IFTTT
I was previously on OOS 2.2.1 and TWRP 3.0.0-2 (phone encrypted) and it was able to decrypt the /data partition just fine.
I decided to update to OOS 3.0 Beta with the modified H2-MM TWRP 3.0.0-1. I did this by dirty flashing. My phone boots up fine and I'm able to unlock the phone and everything seems to be running fine. The problem is now H2-MM TWRP 3.0.0-1 is unable to decrypt my /data partition. It keeps asking for my password, saying it's the wrong password. I know the password is correct because I'm able to get into my phone just fine. Would like to be able to access TWRP to flash su among other things.
Is anyone else having this issue? Anyone have OOS 3.0 Beta with H2-MM TWRP that CAN decrypt?
TWRP 3.0.0-2's decryption was working fine on OOS 2.2.1. I tried using TWRP 3.0.0-2 with OOS 3.0 Beta, but it won't work. Seems H2-MM TWRP 3.0.0-1 is required.
Thanks in advance! :confused:
from xda-developers http://ift.tt/1pOg1dp via IFTTT
Hi, I have been using my nexus 6p for quite a while flashing custom roms like crazy and I read in one of the threads that the battery is best with the stock, so I decided to try it, except I am not getting a real difference.
Now, I need some help reading the battery graphs. I have tried bunch of battery apps to test the wakelock and haven't found much issues. I have turned off scanning, location, wifi, the only thing I did not turn off was the data. I even tried to turn off the SYNC one time and didn't make much difference.
I suspect it is my network. I am getting LTE in my area, but I don't know how to read the signal in the stock battery graph. In total I can be getting about 4 SOT at the end of my day down to 10 percent and I see people are getting crazy 6 or 7. Images below
Mx Player is top rated and considered by the users as one of the best video players available in the globe. I personally using on my android mobile and i found MX Player is the great app for watching videos on smartphones. I have also posted an article on my blog and shared APK file of latest version. Developers of the app placed the APK file for free to download with basic features. Once you have installed on your android mobiles, you can upgrade to its PRO version. If you are looking for an upgraded and top rated app for watching videos on your smart phone, then go with MX Player. You can also visit my blog ROIDPLAY to get the APK file of MX Player. I hope you will enjoy watching videos on MX Player. Don't forget to post your reviews and feedbacks through the app and let's inform developers about their work. Enjoy watching videos with MX Player.
from xda-developers http://ift.tt/1pOfYhA via IFTTT
Today I left the house at 100% battery. Everything was normal until an hour later I pulled my phone out to check the time and it wasn't even on. I guessed I could have somehow held the power button down in my pocket so I just tried to turn it on, but nothing happened. I ran home and put in on the charger and once again nothing happened. The phone is absolutely dead for no apparent reason... Any ideas?
from xda-developers http://ift.tt/1pOfZSG via IFTTT
I bought my wife a refurbished Nexus 5 a while back; whenever she used the speaker-phone, the caller would hear an incredibly annoying echo of whatever they said. I finally took it apart today, and sure enough whoever refurb'd it managed to lose the grommet for the echo cancellation mic.
Does anyone know where I can buy a replacement for this part?
from xda-developers http://ift.tt/1q6qFwL via IFTTT
Get Smart alerts on your watch when you receive notifications on your phone
Have your watch read your notifications aloud
Set Filters: • Applications • Contacts • Trigger events (Battery low or full on watch or phone, watch connected/disconnected,Hourly Beep) • Custom filters : associate conditions and exclusions (app, contact or any text)
Associate alert: • Make your watch read the message aloud (if you watch has a speaker) • Pick a notification sound. (if you watch has a speaker) • Use your own mp3 files • Enter a text to be said, for example contact name. (if you watch has a speaker) • Set a vibrations pattern (not available yet)
Read Notifications Aloud Mode: • Choose what part of the notification to be read aloud (application, title, message). • Possibility to get this mode turned on automatically when driving, running or cycling (Via Activity detection)
Set a sound for the Hourly Beep
Text to Speech fine settings: • Set Speech rate • Set Voice Pitch • Set Volume for each notifications filter
Various settings: • Mute if Phone set to "Do not disturb" • Mute if Phone set to "Vibrate"
I'm using Apex launcher, and I'd really like to use the Samsung system icon for my Apps Drawer, but I couldn't find a PNG anywhere online. I found a thread where someone extracted them from the S6, but the ic_allapps.png is pretty different than the S7. Has anyone had a chance to extract the S7 system icons yet? I probably wouldn't even mind doing it myself, but I don't know how.
from xda-developers http://ift.tt/1RAjkvY via IFTTT
Hi guys, I'm going to buy Xperia Z3, but I have few questions before. 1. Is it worth it yet? WIll it get lower with the price in the time? Actually it costs about 250 Euro 2.. How about camera, I've read many reviews about it and there are diffrefent minds about it. I also saw some threads with camera mods (from Z5 libs etc) , does it seriously get better with quality? 3. How about official updates, will they be released yet? 4.If I'd decide to root phone and run custom rom, I had to restore stock rom to have warranty back? And to run custom rom on z3 I need to unblock bootloader first, yes?
That's all I think
Greetings, have a nice evening!
from xda-developers http://ift.tt/1RAjjYV via IFTTT
I just had my phone repaired and they did a pretty bad job putting it back together again. So I decided to keep the cost down and repair the phone myself as the last guy basically rob me of £100. Even at this price he did not even make the phone water tight again and just glued the screen down here and there in places.
Anyway, I have now opened up my phone, front and back covers have been removed, and I have manage to remove all of the glue which he used. In the process of removing the glue a small black strip came away where the microphone is situated.
Can anybody help me to explain what this is and if it is possible to repair or replace such item? A good guess tells me it is the microphone dust cover??
Many thanks in advance....
from xda-developers http://ift.tt/1UX2jlB via IFTTT
Hello guys, I had an accident where I spilled liquid on top of my phone's screen, it was alcohol based, so it got through the bottom speaker and went to the screen layers. After a couple of days of trying to dry it out, there are still terrible looking streaks that look like water damage. I tried using a hair dryer and a suction tool from my car mount for the phone, to remove the screen, but it won't budge. This method worked easy with my old Nexus 5. Some heat, I pull up and it comes right off. With this - I heated as much as I can, and then pulled with all my strength, but screen will not come loose from the frame. Has anyone removed the screen on their phone, or does anyone have experience in doing such things, to help me pull this off? I believe that if I manage to remove the screen, and clean the layers, screen should be back to 100%. I asked a friend of mine to lend me his heat gun, but I am afraid of applying too much heat and killing the LCD, or doing bad things to the plastic body of the phone. Any help is greatly appreciated.
from xda-developers http://ift.tt/1RAjinV via IFTTT
Im one of those guys with a paperweight. During the holidays last year, I ended up with a blocked Fire TV 2 because of a shipping error. No sweat off my back, as Amazon quickly sent the replacement, but still it kills me to have this sexy black box sit around and do nothing. Amazon doesnt want it back, they dont want anybody using it, and I am not ethically questionable haha. I am literally UNABLE to throw this thing away. At the very least I have an extra remote and power converter, but still... you guys know what im talking about.
Anyhow, Im not unfamiliar with small-component electronics and circuitry. I know we will likely never to be able to bypass the registration screen through the software, as ADB has not yet been turned on for USB or network. This leaves me seeking out hardware root methods to install custom recovery and thus custom firmware to bypass registration. But alas, I cannot find any guides on the subject, nor even a simple discussion. Can somebody point me in the right direction? Any discussion with some recent activity involving EMMC or other methods should suffice. If I dont find anything i suppose ill have to delve into this on my own. Deep waters!
from xda-developers http://ift.tt/1UX2ihu via IFTTT
Rate this thread to express how you think the Sony Xperia Z5's Wifi performs. A higher rating indicates that it has excellent range, throughput, and signal strength. Like when you're taking a dump in the bedroom upstairs, do your videos have to buffer or do they come through without interruption?
Then, drop a comment if you have anything to add!
from xda-developers http://ift.tt/22PC3y8 via IFTTT
When you call granny, does she keep saying "Huh?! Wut?!" or does the conversation flow pretty well? Rate this thread to express how you feel about the Sony Xperia Z5's call quality. A higher rating indicates that calls are clear and crisp, and that regardless of background noise, you can hear the other party clearly (and with ample volume) and they can hear you.
Then, drop a comment if you have anything to add!
from xda-developers http://ift.tt/1SnsUlR via IFTTT
You don't want to give your significant other yet another reason to yell at you while you're reading XDA in bed. Rate this thread to express what you think of the Sony Xperia Z5's display minimum dimness. A higher rating indicates that the display can get extremely dim, ideal for reading in very dark environments.
Then, drop a comment if you have anything to add!
from xda-developers http://ift.tt/22PC0CB via IFTTT
The Sony Xperia Z5 has a crazy crisp display. Just kidding, this is automated text so who knows if this screen is any good. So, you be the judge! A higher rating indicates that it's extremely sharp and clear, and that you cannot see pixels with your naked eye.
Then, drop a comment if you have anything to add!
from xda-developers http://ift.tt/1SnsRWX via IFTTT
If you're colorblind, please disregard this thread. Rate this thread to express how you deem the color saturation and accuracy of the Sony Xperia Z5's display. A higher rating indicates that you think that color accuracy is very high and saturation is excellent.
Then, drop a comment if you have anything to add!
from xda-developers http://ift.tt/22PBXqi via IFTTT
hi guys , i want to flash basic rom for my sister GT-9300 , if someone can provide me a simple - decent fast rom with no bugs and provide gapps and CWM + root ?
and if i find the phone not rooted what can i do ? Thanks and sorry for noob question:) the phone belongs to year 2003 tho so it has old software and its deadly slow now
from xda-developers http://ift.tt/1RyMXO8 via IFTTT
I am using simphony w68q:) (KitKat) and using superior is v3 ... Problem is today I turned my phone's bettery out.. And also my memory card .. But when I turned it on boot logo came then the boot animation .. Then a black screen. It looks like a software CRush!! I turned it off and on again but same case ocured.. Then I installed another:mad: custom ROM and after all my phone opened without any black screen. But it didn't remain so long.. In few minutes my phn crashed again.. A black screen came and I had to install custom ROM again.. This isnt fair.. I can't install a custom ROM frequently after some times..
I can't find out why this is happening and how to solve.. Pls clear it out..
from xda-developers http://ift.tt/1MC0N5A via IFTTT
As in thread.. it's showing.. i installed Discover Tomal ROM 2.0 and other original backup.. Idk how to repair it. Previously both worked very good.. May be it caused by low battery while installing ~35%?
from xda-developers http://ift.tt/1RyMVpz via IFTTT
Please do not say wait another day. Does someone have a working link someone else to where I can download the file?
I am just wanting to be able to re-flash it with ODIN in case it gets super hosed.
Possibility?
I was able to obtain this ROM:
N900PVPUEOC5
Am I able to downgrade from N900PVPUEOK2 to N900PVPUEOC5 safely without any errors? Because I could always just use ODIN and flash that and do upgrades.
Let me know!
Thanks!
from xda-developers http://ift.tt/1RyMUBW via IFTTT
Hello, I hope im in right forum and i hope someone can help me. :)
My issue: I have an Android TV box app that i have installed on my Galaxy Tablet but the issue is that the app doest respond to "touches" i mean, the app works great but i cannot navigate because the app is created to be used with remote control which came with my TV Box.
Using my web developer knowledge i was trying to understand and find "function" file inside extracted apk to change these setting but unfortunately without succes. Is there anyone who can give some tips or advice how i can manage this issue ? :confused:
Thank's a lot!!!
from xda-developers http://ift.tt/1MC0Caz via IFTTT
Hello, magnificent people. Today i would wish to ask if there is a way to put the status bar at the bottom of the screen? For android loli and marshy anyway. Last time i saw it was on jb :C I want it so bad >.< I figured i wouldn't need a floating assistant nor floatification if this was possible at all.
Thank you for everyone who'll answer, let alone view this post ;--; I hope i'm in the right category x.x
from xda-developers http://ift.tt/1RyMQCs via IFTTT
Hi, I'm sorry if this isn't the right place to post this but Im having to use someone else's windows phone and its hard to navigate through the site.
My problem is that I tried to root my s6 edge plus using an application called King Root. The install got to 17% and then turned the phone off. When I load the phone up now I just get the message "custom binary locked by FRP lock" in red writing and the phone instantly boots off.
Is there a way to get around this without losing my data on my phone? I have some very important photos that are on there that I really don't want to lose, unfortunately nothing is backed up. I've been researching and apparently this is possible using a programme called Odin? I hope this is possible as I don't want to lose my stuff on my phone.
Any help would be great, thank you.
from xda-developers http://ift.tt/1MC0zLH via IFTTT
hello my name is teddy could you please help me im in real trouble i recently rooted my samsung galaxy E7 with kingroot it was real easy no problem success. so i thought it would be cool to root my wifes brand new galaxy notebook 4 with king root latest version i think 4.6.8 or something close to that her carir is at&t and it was rooting all of a suden it read eror fix or boost i dont really recal but the phone now shows a triangle (yellow) with an exclamation mark that says System software not authorized by At&t has been found on your phone please turn of your phone and go to the nearest At&T for help , on top inleft top corner in small red letter it says secure fail: kernel. can you please help me restore it i mean unroot it or restore back to normal im in so much trouble please respond soon to privatesimpleclient@gmail.com thank you
from xda-developers http://ift.tt/1RyMPOW via IFTTT
Hello this morning I tried to root my phone using the KingRoot app trough the purify app I downloaded yesterday. When my phone started to "root" it turned off. And when I try to turn it back on it doesn't power up. Instead I am met with a small red message at the top left of the screen that states "KERNAL IS NOT SEANDRIOD ENFORCING Custom binary blocked by FAP Lock" I went to a local phone repair shop and they tried to factory reset my phone and that didn't work. The employee stated that the root is already started and needs to be finished and referred me to this site to seek help. Please help I have no technological back round and just want my phone to work again. :(
from xda-developers http://ift.tt/1MC0tnz via IFTTT
Coming from a few gens of LGs and Nexus devices (with this feature hacked in) I am kinda missing it on my new Note 5. I am almost there.
Knock On is easily replaced by Home button tap. I'm cool with this.
Once Unlocked, I use Action Launcher with Double tap to sleep. That works great. Nova also works with a 3rd party app.
But the Lockscreen is another animal. I can wake the device by the home button, but no way to turn of screen off without gripping it and pressing the power button. I am thinking maybe an alternative lockscreen might have the features I need but any suggestions for a Lockscreen knock OFF?
from xda-developers http://ift.tt/1RyMQSU via IFTTT
sorry for my bad english i am from latin america Today my phone has freezing problem, for my stupity i enter to discovery mode (twrp) then i select "wipe"-"advanced wipe" then i select 5 options DALVIK CHACHE-CACHE-DATA-SYSTEM-INTERNAL STORAGE, after i select "FORMAT DATA" and i slide "swip to factory reset...
after restarting, In my telephone the at&t logo does not appear, then freezes on htc logo pls i need help
i cant do anytyhing!!! i cant restarting and turn off the phone!
from xda-developers http://ift.tt/1MC0qYJ via IFTTT
So my phone battery was bad so i bought a new one, so i disconnected the old one and replaced it with the new one... Then i tried to power the phone on but it didnt turn on at all so i tried to plug it to the wall charger and only got a single red light from the notification led... After all this i tried to put the old battery in and same thing, doesnt power on and only red light.
Anyone knows how to fix this? I really need my phone back to life so i appreciate if someone cant help me.
Thank you in advance!!
from xda-developers http://ift.tt/1RyMOuf via IFTTT
oxygenos 3 is amazing and very fluid but one of my favourite features is not in this build and thats maxxaudio. I know it wasnt possible on CM roms due to closed nature of oxygen. Would it be possible considering its still an oxygen based rom?? thanks
from xda-developers http://ift.tt/1VTTOqZ via IFTTT
Using Xperia Z1c, and testing UT port by excellent dev Munjeni. Port boots and runs great and looks great, and just about everything is working, but for some reason no web browser will open. I've tried the built in browser, as well as the only 2 I found in app store, (Duck Duck Go and Lira [yes, app store works fine]), and they either close as soon as they open, or open and don't respond to anything. Also, after trying to launch browser, I get reboot about 30 seconds later. I got some helpful info in a pm from a UT dev to check logs in /~/cache/upstart, so I did, and found some errors, but I, (and Munjeni), don't know what they mean. Any help here? Thanks
from xda-developers http://ift.tt/1Sy12hf via IFTTT
Install via 64bit TWRP (on any 64bit ROM): (do not forget Flash 64bit ROM from PC via MTK SP Flashtool FIRST !)
If u are on Kitkat stock rom do backup and flash 64bit rom from PC via SP Flashtool FIRST after that u can instal any 64bit ROM via TWRP (64bit) like CM12. .. ... Here is "how to " (but in Czech language NOW , I will rewrite it to EN ASAP :) )
I'm getting issues with card being lost when moving a file & sometimes after attached via usb to computer. When happens card shows up as zero space & need unmount & remount. Card is a kingston 64gb class 10 sdxc & is very new as bought with intention of using in this phone. card seems faultless when in reader on computer & also works fine in my old hd2 ! I assume poor firmware/hardware huawei end to blame !! kind of seeing why it cheap to buy now as everything worse than my old hd2 on wm6.5.5 lol ... Any others experienced sd card issues ?
from xda-developers http://ift.tt/1VTTMPS via IFTTT
Rooted phone, installed dual recovery, decided to have some xposed modules, installed a ton, went into a boot animation, went into recovery and decided to clear system and now I can only access fastboot mode. I tried to fastboot flash boot Z3_DooMLoRD_AdvStkKernel_v01_FW-93.img, but i get FAILED (remote: Command not allowed) at the end so it doesn't work.
I don't think my bootloader is unlockedjust unlocked through flashtool. So I guess I bricked my phone unless someone has a way to fix it. I literally rooted my phone two days ago.
Flashtool says the same thing.
from xda-developers http://ift.tt/1WYrNgd via IFTTT
I was wondering if someone can help me sort a mysterious crash on my X Play M 6.0.1 Dual Sim device. Whenever I press Volume Up and Power on simultaneously the device vibrates and about 60 secs later a crash report is generated. I still think it's Xposed related although it persisted when I uninstalled Xposed. When Xposed is installed and I have e.g. GravityBox running and have the extended power menu enabled, this crash removes the power menu plus e.g. my GravityBox task bar tweaks.
I was wondering if some other X Play users could test this with their devices.
Is there any standard action that is assigned to Volume Up + Power?
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work: - First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums) - Secondly, use the custom made SuperSU (credits to @Yash98) = this link - When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread - Don't run it yet. Download SELinuxModeChanger via the original XDA thread. - Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
from xda-developers http://ift.tt/1VTTGrp via IFTTT
I'm a huge fan of OOS' 'Files' app. I like how it's completely black themed and I really like it integrated Google Drive with a black theme as well. Now I have a little problem with it and I don't know how to solve it. It doesn't seem to update the folders of Google Drive. Some folders are missing, new files and folders are not updated. If I launch the Google Drive app - presto: there they are.. but if I switch back to the 'Files' app, nothing changed. It's kind of weird! Anyone else have this?
Information: Stock OOS 2.2.0 with TWRP and root. Files App is a file explorer that came with OOS and has drive integration with the nice black theme.
from xda-developers http://ift.tt/1VTTEj6 via IFTTT
Hello XDA lovers. Its my first thread over xda and also my first project i am talking about..... i have decided to make custom rom for the Canvas selfie lens. A great device with good performance but a change is always better :p. The custo recovery i am using will be CTR Recovery still cant post links :D. Now i do have some queries regarding setting up the Android Kitchen. Would love to get some help just with some questions i own the device and i would love to handle the things myself but in case some help would be great to have.:o
from xda-developers http://ift.tt/1WYrvpF via IFTTT
HI Friends, (@Vinay) I am new here, and have specifically registered to seek your help I have D2212 IN version which was SIM unlocked. Apparently, I was successful in 1) Unlocking the boot loader 2) Installing Vinay's Custom Nitrogen ROM
Subsequently, I used the phone happily for over 1month and problems started happening where Phone lagged so much that it became unbearable. Also at the same time, I noticed my phone would lose its network. I would get a X next to SIM indicator. No Signal. I swapped the SIM into other phone, the SIM works fine. I put other working sim in the E3 D2212, again no Network. No Data (2G, 3G). Only WiFi works
So I decided to roll back to D2212_18.5.B.0.26_Customized IN.ftf via Flashtool Still no dice. I still see no network.
When I hit *#*#7378423#*#* I think (repeat think) the phone is SIM Locked. No matter which slot (1 or 2) I insert it, I don't get Network or DATA But I can certainly vouch the Same Vodafone IN SIM was working on the phone earlier. Any help in this regards is greatly appreciated. Regards Dharmesh Shah Mumbai, INDIA
from xda-developers http://ift.tt/232nmEN via IFTTT
Hello, Ive searched every where looking for the Pitt Tar File for the NEWER Version of the T-Mobile Note 4 (SM-N910T3), INSTEAD OF ENDING IN T it Ends in T3, my patrons are messed up cause i flashed the wrong files, PLEASE if any one can help me with this file or Enlighten me how to Make a Pitt Tar File it will Definitely be Appreciated from the Herat. Thankssss. Blesssss.....
from xda-developers http://ift.tt/1M0RYlT via IFTTT
Hi guys, anyway to send adb commands to another device via an otg USB cable? I want to be able to plug my smartwatch 3 into my z5 and run adb commands etc. I have seen a few apps for WiFi/PC but none for otg. Any help would be great.
Ps, mod please move if better suited somewhere else. Thanks
from xda-developers http://ift.tt/1ZLlT3F via IFTTT
Please, how to mark as read notifications SMS on Galaxy S6? I'm talk about notifications on Lockscreen. Device running lollipop stock firmware Samsung and stock sms app. My device is rooted, with Xposed and Tasker. Thanks!
from xda-developers http://ift.tt/1M0RYlR via IFTTT
Did you ever dreamed about killing zombies with hammers? Yes? We present a game hammer bros - endless fun Features: - Many upgrades - Cool music and sound effects - Oldschool gameplay - And more
Description: Using joystick at the bottom of the screen to move your hero. Button at the top right side is responsible for the attack, left for use the slow-motion (available for purchase in the shop). Defend against hordes of zombies and achieve the best score!
To find the game type Hammer Bros in Google play app.
Screenshots avaible at the product page.
from xda-developers http://ift.tt/1M0RTPd via IFTTT
Screencap for rooted devices lets you conveniently take snapshots of your screen with one click.
FEATURES: ★ Single screenshot. ★ Multi mode - take multiple screenshots with fixed interval of time. ★ Crop mode - select area on the screen, and then capture it. ★ Edit screenshots before / after saving to file - draw, rotate, crop, delete. ★ Share screenshots.
No adds. No internet permissions.
NOTICE: This app will not work on a non rooted devices.
Hi guys hope all is well Question: How do i get the new ios emojis on my keyboard? I used emoji switcher and the ios emojis are super small . even though i still need an emoji keyboard. Anyone know where i can find one?
from xda-developers http://ift.tt/232hpYr via IFTTT
I'm looking for one that holds the entire phone, not just the battery. I would like it for my desk at work and not a Qi charger, but a USB dock. The style I see on Amazon is the same one just dressed up by various vendors and may be OK, but I would like a very nice quality dock if possible. Thanks!
from xda-developers http://ift.tt/1M0ROem via IFTTT
My third device, main one and the only able to run supported version of Windows 10 Mobile - Microsoft Lumia 640 LTE Dual SIM Country Variant Russia RM-1075, before it there were Highscreen WinJoy and the first is Nokia Lumia 620. Backup from L620 were applied on WinJoy and then backup from WinJoy were applied on 640 when I become an owner of it.
I never used Windows Insider on this one, upgraded by the first hours update made available via Upgrade Advisor.
First I thought it all went well, but today I can provide a list of what is broken:
Groove Music app on All apps list has no icon. App is working
TeamViewer: Remote Control listed twice. When I`m trying to delete it, nothing happens, "faked" one not listed in Storage utility at the Settings and produce black screen when trying to launch it (just start screen wents black, no actual app starting). Working one, app with the icon is just works, can be deleted, can be installed if deleted, no impact on that fake.
Many apps were with the blank icon at the Storage utility, even if they has icon on it`s tile or in the All apps list. I just reinstalled those I could remove and their icons at the Storage were fixed. MiracastView and PrintDialog still has the accent color only. I'm unable or afraid to delete those as they something like system apps, they`re not listed anywhere else.
Sometimes my phone just reboots with no reason, may be just lying on the table without any move while that. It happens once per one or two days.
Device Portal. Just nothing on the tab Home and list of installed apps never loading at the Apps tab. Processes, Networks and all the rest works. I tried to use thirdparty app Device Diagnostics HUB, it produces Server Internal Error 500 when trying to access the Apps tab, nevermind running on phone itself or connected remotely via Wi-Fi from the PC
There is an app without name or icon trying to be installed or update, I don`t know, at the Store. It produces 0x81030131 error after every try. Trying to download 5.7 megabytes, mates with similar issue also reports about 11.5 megabytes
I know there is Hard reset may help but I have many apps and games which data will not be recovered via backup, also some apps are no longer listed into Windows Store.
Is there any I can do about that? My phone is not hacked yet by now but I`m open for any suggestions that will lead not to anything related to flashing/reflashing the entire phone. Thanks
from xda-developers http://ift.tt/232hknJ via IFTTT
I recently updated to android 6.0 via LG support tool. Everything runs smoothly, except from a notification message about SD card that shows up every time I turn on my phone. The notification message just inform me that there is a SD card, so I have the ability to move image and media files there. Also, I noticed the preferences I set to apps that are in the SD card always reset to default, after my phone restarts.
I think this is a software bug, as I replaced the SD and I still have this issues.
Any ideas?
D855, Android 6.0
from xda-developers http://ift.tt/232hcVb via IFTTT
Hi, I know there are already many threads about it but I think I have a slightly different problem: while charging the phone is always active (as if he was doing something in the background) resulting in an extended charge time.
First thought: there must be an active process (developers opts-> show cpu usage) and ... nothing Second thought: maybe "dmesg" can tell me something more and... ...well, that seems something
The "adc" value of the battery significantly increases when connected to the wall charger, so even if the "adc_chg" value is high it is compensated by the high drain of the battery.
Am i wrong? Has someone any idea about the cause of the problem or about how to find it ?
Thanks (going mad, yet changed battery, charger and multiple USB flex ports :eek:)
from xda-developers http://ift.tt/1M0RKLJ via IFTTT
So after unlocking bootloader correctly, i receive this message each time i boot. "your device has been unlocked and can't be trusted", and then the device boots normally after.
I have now flashed TWRP via fastboot, booted into recovery, wiped, and flashed KangVIP Slim.
I still see that same message each time i reboot. Is it normal, and if so, is there a way to get rid of it?
from xda-developers http://ift.tt/1M0RHj1 via IFTTT
As my country haven't gotten the latest update, I decided to download it through SamFirm (official firmware from Samsungs servers, just not capped in download speed like Sammobile).
But the thing is, that after decrypting, it's giving me 5 files and not just one .tar
The first 3 are named AP_xxx, BL_xxx and CP_xxx so it's pretty easy to guess where I should but them. But the last two files are named CSC_AUT and HOME_CSC_AUTO, so which should I use in the CSC slot?
Also, the UMS slot is greyed out, after putting one in the CSC slot and is stating that the firmware is only filling 65mb, even though it fills 1.8gb.
Anyone know what to do?
Thanks in advance
from xda-developers http://ift.tt/232h9sx via IFTTT
Hey guys, today I received my Mi Band 1S and wanted to pair it with my G930F, but then this error from above occures. Any ideas what I can do? I restarted bluetooth several times, but it did not work. Some time ago I also had a problem with pairing a Jambox Mini. I was paired but the Jawbone app said, that there is no Jawbone device conneted. Any ideas how I can connect my Mi Band to the S7?
Thank you!!
from xda-developers http://ift.tt/1V21gPU via IFTTT
Hey peeps, just wondered if i could grab some advice I purchased a second hand memopad 10 me301t, it was never used and just stored I unlocked the boot loader and have installed omnirom 4.4.4.
I can get around 5 maybe 6 hours use out of it is there any way I can extend this at all I've done the standard things turned off wifi have the screen brightness set to automatic etc.
Also does anyone know where I can get the stock memopad 10 widgets from.
And finally where can I get an official asus case from here in the UK.
Many thanks.
from xda-developers http://ift.tt/1pIz9cD via IFTTT
Many of us have issues with the battery standby (or SoT) like most of the rooted user here I have also tried a lot of tricks from disabling CPU cores to removing most of the removable bloat-ware from the original firmware because (while I still was non-rooted user) many times I start the day off charger at 7AM I end up with 3:25 hours SoT and 35% battery at 7PM, then something comes up (like going to the pub) and after 3-4 hours I found my battery at 7-9% without even turning the screen on during that period of time and no clue of what drained the battery.
The idea of this discussion is to track and reveal on what usage (and with which apps) the device is having that specific drain to help non-rooted users find the sweet spot and be helpful for the rooted users. Also some/all the suggestions in this discussion my not work with your device and ever cause it to misbehave or even hardbrick it if not done with caution and further thinking - experiment on your own risk and no one is responsible for any damages!
What is my daily usage: Apps: Facebook / Google Play Music / Facebook Messenger / WhatsApp / Viber / SnapChat / Google Chrome / Inbox / Gmail (with POP3) What I did as non-rooted user: - Factory Reset - Stopped using Moto Voice and Double Twist - Disabled every app that is from Motorola (and it is allowed to be disabled) - Stopped WiFi scan (not sure because even when turned off the green bar was still visible in the battery graph) - GPS and NFC are off when not used note: those changes helped me to get through a day with normal usage and from 7AM to 7PM I end up with 3:35 SoT and 37% battery Continuing with root: - Changed the CPU governor from interactive to ondemand (since interactive boosts the clocks at the highest on touch) - Ultra Kernel (adreno idler does a great job) note: those changes helped me to get through a day with normal usage and from 7AM to 7PM I end up with 4:10 SoT and 45% battery and until 6.0.1 came out
Yesterday (without the root changes) after some music stream through GPlay Music in the morning after a few hours (~4) my battery was at 60% with 1:50 hours SoT and GPlay Music on the top with 23% battery use and 2 hours later the battery drop on 11% with 2:45 hours SoT and GPlay Music with 6hours CPU use. The only difference with the other days and yesterday was using the MicroSD card as cache for streamed music (note that the card is class 4)
So sometimes could be the MicroSD card('s slow speed) to blame or maybe the Google Play Music App itself.
Suggestions for root user are welcomed too like CPU Tweaks, Removing unnecessary apps, etc. and will be separated from the non-root suggestions
I really hope to make some good discussion about tweaking the Standby time (SoT) on the lux.
from xda-developers http://ift.tt/1V21gzu via IFTTT
My new Shield tablet has a 1/2 centimeter diameter area beside the left edge of the touchscreen that is not the same brightness as the remainder of the screen. It is as though a shadow is cast on this area. The only similar posts I've seen are yellowed areas related to glue and darkened areas around points of finger/stylus pressure. It is none of these. It stays in the same position regardless of screen content, and doesn't show up in screenshots.
I have a small incentive in keeping the tablet, as I immediately installed intelliarmour glass, but if it doesn't go away, it will certainly annoy me too much to keep it. Any ideas what might cause this, and whether it will go away?
from xda-developers http://ift.tt/1pIz9cz via IFTTT
I have a S5 Octa Core (G900H) I rooted and deodexed my ROM (5.0 Lollipop).. Now I am trying to replace my Touchwiz with a S6 or N5 one but theme chooser and theme center doesnt work.. touchwiz works but when I open themes it crashes.. does anyone has working TW with theme choser and theme center on stock rooted 5.0.. thanks
from xda-developers http://ift.tt/1V21gzs via IFTTT
I attempted to root with cs autoroot a month ago, but it failed, so I turned off the OEM unlocker, but later on today I was restarting it and it went into a brick with the message "Custom binary blocked by FRP lock" displayed on the top of the screen and then the screen goes off again. I tried to go into recovery and reset, but the message came up again. I also tried to flash with the stock firmware, but it said that it failed. Help?
from xda-developers http://ift.tt/1pIz6xA via IFTTT
As you may have seen, Samsung has a new preview of the SystemUI available. http://ift.tt/1Skqnc6
It looks very nice imo and a friend of me has a S6 Edge + , on that phone, it also works but we need MM Is there any way to port this to Lollipop? :) Or is here anyone that can explain how I can port it ?
Thanks in advance and sorry for my bad English :)
Greetzzz
Lolboy143
from xda-developers http://ift.tt/1V21gj3 via IFTTT
So I'm having this discussion with a friend that states that you need 4GB of RAM or even more to run smoothly a 64-bit ARMv8 version of Android. So basically my question is: Will 2GB of RAM be enough for, let's say, Android 6.0.1 ARMv8 64-bit version?
Consider ARMv8 64-bit version of Android consumes more RAM casue 64-bit apps and ROM's are larger, so more RAM is needed. The Nexus 5X has a Snapdragon 808, which is ARMv8 64-bit CPU. Does the Nexus 5X have a 64-bit ARMv8 Marshmallow version or a 32-bit ARMv7 Marshmallow version?
from xda-developers http://ift.tt/1pIz8Wf via IFTTT
Dirty Unicorns is a project that started out with no name. It was a project that was first based off AOKP back in the early days of Jelly Bean. In the early days -- it was just a one man show on one device, the EVO 3D. Since then, many others have joined the project and it has grown exponentially.
We have seen a lot of talent contribute to this project of ours. Big or small, the focus was always on contributing to the community. That is ultimately why we do what we do. After Jelly Bean, we decided to move to a new base, OmniROM. While AOKP was fun, OmniROM proved to be even more exciting base because it challenged us to see what we could do with a project that had different goals in mind. We learned a lot and gained contributors in the process. With Lollipop, we moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. We grew further with experience and learned a lot more along the way.
It has been an awesome learning experience and it's still not over! We are still learning, striving to grow each day, and continuing to move forward. Lastly, we DO NOT accept, nor ask, for donations. We do not believe in that. Everything that is necessary to keep this project going comes out of our own pocket. Gerrit, Jenkins, Websites, Devices, etc. We will never ask for a dime. All that we do ask is that you have patience, search for answers prior to posting, read, and try to enjoy the process with us!!
Version 9.7 - Update to Android 5.1.1_r18 - Add Hot Reboot to Power Menu - Fix 3-finger Gesture - Slimified Nav Ring targets - Ability to ignore interruptions while active media playback - Add OmniSwitch as Recents - Add Gesture Lockscreen - Ability to hide Power Menu on the Lockscreen - Ability to have notification lights while screen is on - Bring back the Battery Bar - Allow lockscreen elements to be themeable via color changing - Ability to disable Privacy Guard notifications - Add Volume Panel QS tile - Disable extended statusbar weather by default - Add ability to rotate the lockscreen - Haptic feedback for QS tiles - Time Contextual Headers - Fix NFC tile disappearing - Volume panel timeout ability - Long press lockscreen lock icon to sleep or activate Torch - Add menu action to OmniSwitch - Fix Ad Blocker - Re-organize Dirty Tweaks to make things more streamlined - Further optimizations and bug fixes - CMTE fixes - Updated translations
Version 9.5 - Update to Android 5.1.1_r8 - Add Breathing Notifications (calls/sms/voicemail) - Slim Recents - Option to disable Torch on screen off - Add Slim Navbar customizations - Add SlimPIE - Add SELinux Switch - Add NavBar Tile - Move button mods to Navigation menu - Add Expanded Desktop - Add Weather to Settings (cLock) - Add back IME arrows - Add DU Logo in Statusbar (plus color changing ability) - Add ability to disable Lockscreen Shortcuts - Update more icons to Material Design - Fix 4G instead of LTE switch - Add Live Volume Steps - Add Config for WiFi Country Code - Hotspot Idle Config - Per App Controls for keyguard - Simplify how Extra Info determines density - Font change size for SMS/MMS composition or incoming - Assorted bug fixes - Various translations
Version 9.3 - Update to Android 5.1.1 - Materialize DSPManager - Fix SysUI FC for Themes with QS mods - Change checkboxes to switches - Remove Voice Dialer - Fix for Play Services deep sleeping - Fix various Theme Engine issues - Add back notification LED settings backend - Fix NavRing FC - Expose values for our applications to be themed - Hide lights settings if device doesn't support them - Don't set preferred APN's automatically - Fix battery and notification lights - Various translations
Version 9.2 - Added DU-Updater - Make Navring available to devices with no navbar - Add user configurable shortcuts - Implement ambient display as Active Display - Change location sensors mode in quick settings - Show carrier label / custom and change color - Add Left clock - Volume rocker music controls - Double tap to sleep on navigation bar - Navbar ring targets - Option to show four tiles per row - Lots of tiles added - Theme Chooser updates
Version 9.1 - Navigation Bar Customization - Add navigation bar arrow keys toggle - Add left and right virtual buttons while typing - Create expandable volume panel - Battery and Notification Lights - Add Sync tile - Screenshot Tile - Update default app icon to a more material like icon - Material Design makeover - Proximity speaker: add time delay preference - Headsup Options - Mms improvements - Lockscreen Tile - Lockscreen shortcut customization - Themed DU kb hints/spacebar - Add About DU to settings/about phone - Add our changelog back - Allow disabling of FC dialogs - Update SuperSU v2.45 - Materialize volume panel in/out animation - Power menu screenshot delay - Theme Engine
Version 9.0 - Initial Release of Lollipop For detailed change log, check http://ift.tt/1gXMeGc
Credit and Thanks:
We would like to give thanks to everyone that contributes to the Android community, big or small because every bit counts. Although we can't list each and every contributor within the Android community, we would like to highlight some of the teams and individuals that have made it possible NOT only with just this version of DU but throughout the years because we don't ever want to forget where we came from nor those that have helped us!
That said, on behalf of the DU team we say THANKS to....
JMZ Software 5 lb 6 oz Baby Jesus :laugh: Code Aurora Forum Omni ROM Android Open Kang Project (AOKP) Android Ice Cold Project (AICP) XDA-Developers SlimROMs Preludedrew Max Weninger Team Black Out CyanogenMod Pure Nexus Project
**If we have left someone or some team out, we apologize and please PM us**
The download link is slow, can you provide a mirror? From time to time, we perform maintenance on our website but we do not authorize any mirrors. Please have patience!
I'm on a TEST BUILD and have this bug, can you help? Please keep any discussion about test builds in the G+ community!
Are you coming from a ROM with Layers? Make sure you remove your 'overlay' folders and perform a FULL WIPE
My battery stats are all messed and reporting the wrong percentage, what can I do? Stop using another kernel. Do a FULL WIPE and flash the ROM again
Is this ROM CM based or AOSP based? This ROM is based off AOSP
Does this ROM have layers or the CMTE? This ROM uses the CM theme engine
Pulse doesn't work with [insert music app] Check this thread out http://ift.tt/21yFI30
I'm getting a FC from the theme chooser, what gives? This is due to restoring data/apps from Google. Go ahead and clear data and cache for theme chooser and theme provider then reboot you should be good moving forward.
I changed my LCD density and now the navbar looks weird, what gives? This is currently an issue that we are aware of and are addressing. For now, after you've changed the density -- reset navbar layout or stay on the stock density.
Mx Player is top rated and considered by the users as one of the best video players available in the globe. I personally using on my android mobile and i found MX Player is the great app for watching videos on smartphones. I have also posted an article on my blog and shared APK file of latest version. Developers of the app placed the APK file for free to download with basic features. Once you have installed on your android mobiles, you can upgrade to its PRO version.
